Mercedes Repair Archives - Schearer's Sales and Service, Inc. https://www.schearers.com/category/mercedes-repair/ Mon, 19 Jun 2023 21:17:06 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 https://www.schearers.com/wp-content/uploads/2019/02/fav-schers.png Mercedes Repair Archives - Schearer's Sales and Service, Inc. https://www.schearers.com/category/mercedes-repair/ 32 32 How to Deal with a Mercedes Mass Airflow Sensor Failure https://www.schearers.com/how-to-deal-with-a-mercedes-mass-airflow-sensor-failure/ Fri, 21 Apr 2023 21:09:32 +0000 https://www.schearers.com/?p=8809 The Mass AirFlow (MAF) sensor is an important component of the Mercedes engine management system. It measures the air entering the engine and sends that information to the car’s engine control module. This information is then used to adju...

The post How to Deal with a Mercedes Mass Airflow Sensor Failure appeared first on Schearer's Sales and Service, Inc..

]]>
The Mass AirFlow (MAF) sensor is an important component of the Mercedes engine management system. It measures the air entering the engine and sends that information to the car’s engine control module. This information is then used to adjust the ignition timing and fuel injection to optimize engine performance.

If the sensor fails, it can result in many issues, including poor fuel efficiency, reduced power output, and even engine stalling. In this article, we will discuss the causes and symptoms of Mercedes’s MAF sensor failure and what to do to remedy the issue.

Look for These Typical Causes of Mercedes MAF Sensor Failure

  • Dirty or Clogged Sensor: Over time, the MAF sensor can become coated with dirt, dust, or debris, which can interfere with its ability to measure airflow accurately. This can lead to a range of issues, including poor fuel efficiency, reduced power output, and engine stalling.
  • Electrical Problems: The MAF sensor relies on an electrical circuit to function correctly. If this circuit fails, it can cause the sensor to malfunction, leading to various issues.
  • Failed Sensor: Over time, the MAF sensor can fail due to wear and tear, age, or damage. When this happens, it will need to be replaced to restore normal engine function.

Symptoms of Mercedes MAF Sensor Failure

The symptoms of Mercedes mass airflow sensor failure can vary depending on the severity of the issue. Some of the most common symptoms include:

  • Decreased Fuel Efficiency: The MAF sensor helps to determine the amount of fuel that needs to be injected into the engine. If the sensor is malfunctioning, it can send incorrect information to the engine control module, causing the engine to consume more fuel than it needs.
  • Rough Idling: A faulty MAF sensor can cause the engine to idle roughly or even stall. This is because the sensor may not be providing accurate information to the engine control module about the amount of air entering the engine.
  • Engine Misfires: If the MAF sensor is not working properly, it can cause the engine to misfire or run unevenly. This is because the sensor may not be providing the correct air-to-fuel ratio.
  • Check Engine Light: A faulty MAF sensor can trigger the check engine light to come on. This warning light will be displayed on the dashboard and may indicate a variety of issues, including a problem with the MAF sensor.
  • Poor Acceleration: If the MAF sensor is not working properly, it can affect the acceleration of the vehicle. The engine may take longer to respond when the driver presses the gas pedal or may not respond at all.
  • Reduced Power: A malfunctioning MAF sensor can cause the engine to lose power, resulting in decreased performance. The vehicle may feel sluggish or have difficulty climbing hills.
  • Black Smoke from Exhaust: If the MAF sensor sends incorrect information to the engine control module, it may cause the engine to run too rich. This can result in black smoke coming from the exhaust, indicating that there is too much fuel in the combustion chamber.
  • Stalling or Jerking: In some cases, a faulty MAF sensor can cause the engine to stall completely or jerk while driving. This can be especially noticeable when accelerating or when driving at a consistent speed.

It is important to note that these symptoms can also be caused by other issues with the vehicle. So if you are experiencing any of these symptoms, the best solution is to have your vehicle inspected by a qualified mechanic to ensure that the MAF sensor is the culprit. This will prevent further damage to the engine.

Let Schearer’s Sales and Service Fix Your Mercedes

At Schearer’s Sales and Service, Inc., we Mercedes Mass Airflow Sensor Check have a team of qualified technicians with extensive experience in diagnosing and repairing MAF sensor issues in Mercedes vehicles. We serve residents in Allentown, Bethlehem, and Macungie, PA, and provide top-quality services to ensure your vehicle’s optimal performance. So, if you need a reliable and trustworthy auto repair shop to fix your Mercedes, book an appointment with us today. We will be happy to assist you in getting your car back on the road safely and smoothly.

The post How to Deal with a Mercedes Mass Airflow Sensor Failure appeared first on Schearer's Sales and Service, Inc..

]]>
Reasons Behind the Abnormal Noise in the Rear Suspension of Your Mercedes-Benz https://www.schearers.com/reasons-behind-the-abnormal-noise-in-the-rear-suspension-of-your-mercedes-benz/ Fri, 04 Nov 2022 11:54:14 +0000 https://www.schearers.com/?p=8376 Nothing ruins the image of a brilliant Mercedes-Benz driving down the road, glistening in the sun, throwing care to the wind, than the sound of squeaking metal parts scraping and clunking together like an old box truck. You did not spend tho...

The post Reasons Behind the Abnormal Noise in the Rear Suspension of Your Mercedes-Benz appeared first on Schearer's Sales and Service, Inc..

]]>
Nothing ruins the image of a brilliant Mercedes-Benz driving down the road, glistening in the sun, throwing care to the wind, than the sound of squeaking metal parts scraping and clunking together like an old box truck. You did not spend thousands of dollars to get that kind of reputation. You don’t want your neighbors wondering why you can’t take care of an investment like your Mercedes-Benz, and you don’t want your clients or customers thinking you are irresponsible. What do you do when your favorite car is making these awful noises from your rear suspension?

Noises: Squeaks or Clunks?

Clunks are not typically an issue for rear suspensions, but occasionally they will occur. The origin of the noise is the improper installation of new hardware in almost every case. There are two places of issue in the rear suspension of your Mercedes-Benz vehicle: the sway bar bushing brackets and the sway bar end link. In both cases, if you tighten the point of issue, it should resolve the clunking noise you hear from your rear suspension. This is not an especially difficult mechanical procedure to perform yourself, provided you can get to the suspension.

Nevertheless, bear in mind that this clunking noise problem almost always comes from an improper installation of hardware, and if you do not do the job more correctly than the lasts person who worked on your car, you may end up making the problem worse and causing damage to your suspension.

Squeaking noises are another matter altogether. Squeaking sounds coming from the rear suspension of your Mercedes-Benz may indicate that your suspension components have become damaged or worn out with use over time. Many of these fixes require replacing parts of the suspension, or other systems.

Sway Bar

It is not always easy to tell which component is causing the squeaking noise, but you can start with the sway bar. The sway bar bushings have a tendency to wear down because they are exposed to outside elements which eventually corrode them. They need occasional lubrication and eventual replacement over time.

In addition to the bushing, the sway bar end links can create strange noises as well. They have two ball joints which are quite famous for failing and require replacement. This task requires a special 12-sided tool to complete.

Arms

The adjustable camber arms are also out there, exposed to the elements often, and can cause squeaking noises over time. The arms require a lot of lubricant, so be very generous in your application of lubricant on them and expect to reapply eventually, particularly if your car endures a lot of hard weather.

The lower control arm bushings also wear down over time and need to be replaced. Of all the squeak related problems with your rear suspension, this may be one of the most challenging to fix. Spraying lubricant is not a good test to see if the lower control arm is the source of the noise either. The best way to deal with this is to try everything else first and if they are not the source of the problem, replace the lower arm. With the proper equipment you can get by with a partial replacement of the lower control arm, but the time it takes to do it and the complicated attachment of the bushing to the rear hubs in your wheels (which also need to be replaced) make it simpler to just replace the whole arm.

Lug Bolts

The last common problem causing squeaks in the rear of your Mercedes-Benz is not exactly a suspension problem. Squeaking can occur when your rear lug bolts are too long for your wheels. When you put on new tires, or even your spare tire, you need to make sure that they are the proper size for your lug bolts. You can check this by comparing how far your lug bolts come out the back of your new and stock wheels. It should be the same length. One of the consequences of driving with lug bolts that are too long for your wheel is that you will quickly lose functionality in your parking brake and will have to replace it.

Schearer’s Sales & Service provides Mercedes-Benz Rear Suspension Abnormal Noise Fix the assistance your car requires and the peace of mind you need in knowing that your car is in capable, trusted hands. While it may be tempting to attempt auto repairs yourself, you risk injury and the potential of damaging your car even more if you do not have the right tools and expertise. If you live in or around Allentown, Bethlehem, and Macungie, PA, don’t risk the thousands of dollars in damages by trusting your Mercedes-Benz in the wrong hands. Call Schearer’s Sales & Service today!

The post Reasons Behind the Abnormal Noise in the Rear Suspension of Your Mercedes-Benz appeared first on Schearer's Sales and Service, Inc..

]]>
Common E Class Benz Problems from the Experts in Allentown https://www.schearers.com/common-e-class-benz-problems-from-the-experts-in-allentown/ Sun, 10 Jul 2022 20:29:50 +0000 https://www.schearers.com/?p=8098 There is no doubt that the Mercedes E-Class is an extremely well-built automobile that still looks great today, and it’s a car that you can be proud of driving without the ostentatious showiness of a sports car. If you head to the used c...

The post Common E Class Benz Problems from the Experts in Allentown appeared first on Schearer's Sales and Service, Inc..

]]>
There is no doubt that the Mercedes E-Class is an extremely well-built automobile that still looks great today, and it’s a car that you can be proud of driving without the ostentatious showiness of a sports car. If you head to the used car lot, there are some great deals you can find, but how do you know that you’re not getting a lemon?

This article will help you identify and avoid some common difficulties and problems that you may encounter with an E-Class Benz.

Brake Issues

There are a number of problems you can encounter with your E class Benz, and at the top of the list is a safety issue. When talking about safety we cannot do without mentioning your vehicle’s brakes. As a result of an issue with Sensotronic brake controls, a number of cars built from January 2004 to April 2004 were returned to the manufacturer for service. This is because the cars inadvertently switch to the standard hydraulic braking system, causing a warning light to illuminate.

Transmission Problem

E-Class Benz vehicles can sometimes have transmission problems. This problem can surface if you’re shifting from gears one to three when shifting up or three to one when shifting down. When your car has this harsh shifting issue, you will hear a very loud and audible clunking sound when your Mercedes finally shifts. Most drivers get scared of this harsh shifting and stop driving immediately.

If you continue driving, you may not notice this issue again for a couple of days. Even after taking your car to a mechanic, they might test the car and it will shift normally, only for you to get on the road a couple of days later to discover another series of harsh shifting. The major cause of this kind of issue in your E class Benz is a failed turbine speed sensor located in the transmission. This is not an issue you want to DIY, because you will have to dismantle your transmission system and replace the turbine speed sensor.

Crankshaft Position Sensor

If you’re driving along the road and your car just dies out on you, it could be a sign that the crankshaft position sensor is faulty. When your car has this issue, the check engine light is likely going to come on. If you or your mechanic use a scanner, you will likely get a P0336 code, which indicates a crankshaft position sensor problem. Unfortunately, with these symptoms this might not be the only issue with your E Class Benz, as the camshaft position sensor may also be faulty. It’s advisable to change both components because they both cause the same issue.

Thrust Link

The forward thrust link is located at the front of the vehicle, and its function is to keep the wheel in your vehicle from going forward and backward. This component becomes faulty when the bushing becomes dry and cracks. Sometimes the bushing might even separate, resulting in uneven wear on your tire. To fix this issue, you have to replace the bushing or go to your mechanic for a wheel alignment.

Interior Issues

One of the issues you might have with your E Class Benz is the interiors. It’s normal for some interior parts to fade over time as you drive your vehicle, but another thing you might begin to notice is creaky sounds from the interior when you drive on rocky or bumpy roads. This is usually caused by worn parts that should be holding some of these interior components. An easy fix to this is shimming.

Work with Our Professionals

Schearer’s Sales and Service, Inc. is the most dependable auto repair shop in your area, Mercedes-Benz E-Class Crankshaft Position Sensor Check and we welcome European car owners from Allentown, Bethlehem, and Macungie. There are a number of problems in every car and some of them are unavoidable because vehicles are expected to deteriorate over time. If you have an E Class Benz that is giving you issues, you can bring it down to our experts for repairs.

We can also help you schedule regular maintenance that will help your car last longer. Ensure that your E class Benz receives the care it requires. Schedule your next car service with us right away.

* Mercedes-Benz E-Class Car image credit goes to: YuriyVlasenko.

The post Common E Class Benz Problems from the Experts in Allentown appeared first on Schearer's Sales and Service, Inc..

]]>
The Leading Repair Shop in Allentown to Fix a Plastic Guide Rail Failure in a Mercedes https://www.schearers.com/the-leading-repair-shop-in-allentown-to-fix-a-plastic-guide-rail-failure-in-a-mercedes/ Sat, 11 Sep 2021 07:13:14 +0000 https://www.schearers.com/?p=7503 The plastic guide rail, also known as the time guiding chain, is a small rectangular piece of plastic in the engine of Mercedes Benz and some other automobile brands. Its small size makes it look irrelevant, but looks can be deceiving. The pl...

The post The Leading Repair Shop in Allentown to Fix a Plastic Guide Rail Failure in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
The plastic guide rail, also known as the time guiding chain, is a small rectangular piece of plastic in the engine of Mercedes Benz and some other automobile brands. Its small size makes it look irrelevant, but looks can be deceiving. The plastic guide rail is a vital component in the engine of your vehicle.

If it fails, it might need to be replaced or just fixed. Early diagnosis of a faulty plastic guide rail will go a long way to prevent further damage to your engine. Hence, it is vital to look out for the signs. In this article, we take an in-depth look into the causes and diagnosis of the failed plastic guide rails and the best place to fix them.

Causes of Failed Plastic Guide Rails

People have often asked why guide rails are made from plastic and then put in the hottest part of a vehicle, being the engine? Mercedes and several other vehicle brands use plastic because it has proven to improve the overall performance of the main timing chain. Plastic is also a cheaper alternative to any other raw material. Several factors, with heat as the main factor, can cause the plastic guide rails to fail:

  • Heat: Heat is the most common cause of plastic guide rail failures. Plastic has low thermal conduction; hence, it is very susceptible to the heat generated in engines where it is contained. Overheating of engines or driving in very high temperatures puts your guide rail at risk of failure. So, if your Mercedes has a problem with overheating, you might want to check your guide rails, too, to see if the heat has not strained it.
  • Road bumps: Impact with another vehicle, curb, or pothole can also result in a failed guide rails, especially when bumpy impacts are regular. The plastic guide rails might get worn down, weak, or shatter.
  • Lack of maintenance: Lack of maintenance is a leading cause of failed guide rails. As time goes on, the guide rails of your Mercedes will age and begin to fail. Routine maintenance can help you detect it early and get it fixed. Also, practicing safe driving as a part of vehicle maintenance will also help to prevent major problems from getting out of control.

Diagnosing a Failed Plastic Guide Rail

Prevention is better than cure. Hence, early diagnosis will go a long way to prevent further damage. Below are four common and early signs of a failing plastic guide rail in Mercedes:

  • The engine makes a constant rattling sound.
  • The engine makes grinding noise upon starting.
  • You notice a squealing tensioner.
  • A rough-running engine.

Fixing Failed Plastic Guide Rail

Fixing the plastic guide rails is not an easy task and should be done by professionals. Although the guide rail is inexpensive, installing it will always require a professional. Hence, research the best auto repair shop in your area to fix your plastic guide rails.

Leave it to Our Professionals at Schearer’s Sales and Services

There are lots of Do-It-Yourself videos on how to fix failed plastic guide rails on YouTube. Mercedes Plastic Guide Rail Failure Fix While this might seem like a good enough solution because of the low cost, professional mechanics are always the better option. The repair process requires expertise and technical know-how that only trained professionals can offer.

If you are looking for a professional auto repair shop, the solution is Schearer’s Sales and Service. We are here to give your engine that professional touch and maintain your vehicle throughout its lifetime to ensure your safety and pleasure when driving it.

Schearer’s serves clients in and around Allentown, Bethlehem, and Macungie, PA. All our technicians are trained & experienced and have all it takes to maintain and repair your Mercedes. Schearer’s also uses the latest tools and technology to repair and maintain your Mercedes.

For over ten years, Schearer’s has been rated as a top auto repair service center with affordable prices for our customers. Drop by our shop and leave smiling as we handle your vehicle repairs and maintenance quickly and affordably. Call us today or visit our website to book an appointment with us.

* Mercedes Benz Car image credit goes to: Julie Deshaies.

The post The Leading Repair Shop in Allentown to Fix a Plastic Guide Rail Failure in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
The Top Repair Shop in Allentown for Transmission Leak Issues in a Mercedes https://www.schearers.com/the-top-repair-shop-in-allentown-for-transmission-leak-issues-in-a-mercedes/ Mon, 07 Jun 2021 16:20:26 +0000 https://www.schearers.com/?p=6898 A quality vehicle like the Mercedes-Benz is best kept in as great of a condition as possible. While catching small problems can be difficult, one thing that is easy to notice is a transmission leak. This type of fluid leak is fairly serious as...

The post The Top Repair Shop in Allentown for Transmission Leak Issues in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
A quality vehicle like the Mercedes-Benz is best kept in as great of a condition as possible. While catching small problems can be difficult, one thing that is easy to notice is a transmission leak. This type of fluid leak is fairly serious as it can cause damage to the inside of your car and require fluid replacement. Fortunately, there are trained technicians out there ready to help you get your Mercedes back up and running the way that it should.

Symptoms of Transmission Leaks

The most clear sign of a transmission leak is a small puddle of fluid underneath your Mercedes. This is easiest to notice while your car is parked somewhere.

Differentiating between transmission fluid leaks and other fluid leaks is easiest to do with a sheet of paper. If you notice some sort of leak, you can place a piece of paper underneath the leaky spot and wait a few hours. Then, examine the sheet for the color and smell of the leak.

Transmission fluid is usually red and slippery with an oily smell. In addition to seeing the leak itself, there are a few other symptoms of transmission leaks to watch out for in your Mercedes.

  • Grinding Sounds: The transmission must be lubricated to keep its different parts moving properly. If there is a transmission fluid leak, it could cause the metal parts to grind against each other, producing an unsettling noise.
  • Cracks In The Transmission: A transmission fluid leak could indicate a different problem, like a crack in the transmission somewhere. This is an even more problematic issue that must be addressed immediately.
  • Stained Concrete: Transmission fluid, being reddish in color, will stain the concrete that it’s leaking on. Even if you don’t catch the leak right away, you’ll be able to notice the stain on your driveway or garage floor.

Causes of Transmission Leaks

There are a number of causes that this problem can happen in your Mercedes. They range from extremely serious to rather insignificant. Some of the most common causes of transmission leaks include the following:

  • Incorrectly-Tightened Drain Plug: If you’ve recently had your Mercedes serviced, there could have been an issue with retightening the drain plug that keeps fluid in the pan. Alternatively, if the drain plug is tightened too closely, it could damage the plug and cause transmission fluid to leak. Balance is the most important thing with the drain plug.
  • Transmission Pan Holes: The transmission pan’s function is to keep transmission fluid in your Mercedes. It is found on the underside of your car, which is subjected to possible damage from debris that strikes it. If the pan has holes in it from damage, fluid can leak from it.
  • Problems With The Transmission Pan Gasket: This gasket is a piece of rubber that sits between the transmission housing and pan. Although it is tiny, it is critical for function. If it breaks or tears or otherwise loses function, transmission fluid can leak from your car.
  • Torque Converter Cracks: The torque converter’s function is to transfer transmission fluid around your vehicle’s transmission to keep things lubricated. If there are cracks in this part, fluid can leak out.

Schearer’s Sales and Service for your Mercedes

Located off of Crackersport Road in Allentown, Pennsylvania, Schearer’s Sales and Service is PA’s premier European automotive repair shop. Mercedes Transmission Pan Check We service Mercedes drivers from all around the area, including Bethlehem and Macungie, PA.

Our licensed mechanics are trained and ready to help you diagnose and repair your transmission fluid leak, along with any other problems you may be experiencing. We offer the best customer service in the state and a dealership alternative like no other.

In addition to repairing transmission fluid leaks, Schearer’s Sales and Service offers the following comprehensive repairs and tests for your Mercedes:

  • Oil changes
  • Diagnostic inspections
  • Brake repair
  • Air conditioning repair
  • Factory recommended services
  • Emergency services

If you find yourself experiencing any of the above symptoms with your prized Mercedes-Benz, bring your car to see us today. We guarantee that the issue will be found and fixed at a fraction of the cost a dealership would charge you. Call us today and see why we are the best in the business.

The post The Top Repair Shop in Allentown for Transmission Leak Issues in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
Where to Go to Fix Your Mercedes’ Gear Selector Issues in Allentown https://www.schearers.com/where-to-go-to-fix-your-mercedes-gear-selector-issues-in-allentown/ Fri, 03 Jan 2020 07:46:24 +0000 https://www.schearers.com/?p=4592 Driving your Mercedes provides you with excitement and safety, but that is only true for as long as your car is working properly. One of the main components of your Mercedes is the gear selector. The gear selector is the piece of equipment tha...

The post Where to Go to Fix Your Mercedes’ Gear Selector Issues in Allentown appeared first on Schearer's Sales and Service, Inc..

]]>
Driving your Mercedes provides you with excitement and safety, but that is only true for as long as your car is working properly. One of the main components of your Mercedes is the gear selector. The gear selector is the piece of equipment that allows you to change what gear you are in. It is also known as the gear shifter. The gear selector often doesn’t require much thought because it is natural to reach for it and change from park to reverse or reverse to drive.

If you have an automatic transmission in your Mercedes, then the different gears will be labeled alongside the gear shifter. If you have a manual transmission, the gears will be numbered on the gear knob. As time goes on, you may notice a change in the ease of function of your gear selector. Below you will learn about the signs and causes of issues relating to the gear selector and where you can go to have that addressed.

Signs Of Gear Selector Issues

The first sign that may notify you of a problem is a grinding noise during gear shifting. The grinding noise could be from a lack of fluid, general wear and tear, or something entirely different. Either way, you will be able to hear grinding as you change gears when an issue has come up that has to do with the gear selector.

The second sign that you can look for is rough gear shifting. You will notice this immediately, since you will struggle to shift the gears of your Mercedes. It will seem like your Mercedes is fighting you as you when you want to accelerate using different gears.

Causes Of Mercedes’s Gear Selector Issues

Before taking your Mercedes in for maintenance, it is important to know of some causes behind gear selector issues. Knowing these causes will enable you to be better prepared for the maintenance visit. This way, everyone can be on the same page about what parts of your Mercedes needs to be addressed. You will not be lost of confused about what the technician is discussing with you.

Valve Body Failure

One of the first causes that can lead to gear selector issues in your Mercedes is a failure in the valve body. The valve body is responsible for flowing the hydraulic transmission fluid through the engine to the necessary parts, one of those parts being the gear selector. If the gear selector is not getting the proper amount of hydraulic fluid, then the parts will lose their ability to glide smoothly. The friction will cause the gear selector to have wear and tear issues and eventually stop working altogether. So the first place the check if you are having gear selector issues is the valve body. It may just be that more hydraulic fluid is required.

Normal Wear and Tear

The second cause for gear selector issues in your Mercedes is related to general wear and tear. The longer you own your Mercedes, the more your gear selector is used. You use it every time you drive, so it is only natural that the parts will begin to wear down. This can even happen if the parts are getting the proper amount of hydraulic fluid. The best way to catch if the gear selector issues are due to wear and tear is to keep up with the routine servicing as designated in your scheduled Mercedes maintenance requirements. Your trusted Mercedes technician can also help you to stay on top of this with reminders for proper upkeep.

Where to Go to Fix Your Mercedes’ Gear Selector

When it comes to an issue with your Mercedes Gear Selector Issue Fix Mercedes’ gear selector, you want to make sure it is being addressed by professionals. Our goal at Schearer’s Sales and Service, Inc. is to provide each of our customers with accurate and error-free servicing in a timely manner. We build the trust of our customers with each successful visit. We aim to build long-term relationships with our customers and provide excellent service for all vehicles brought to our garage for repair and maintenance. We are accessible from the areas of Allentown, Bethlehem, and Macungie, PA and surrounding communities. Make an appointment with us, and we will expertly repair your Mercedes’ gear selector quickly without breaking your budget.

The post Where to Go to Fix Your Mercedes’ Gear Selector Issues in Allentown appeared first on Schearer's Sales and Service, Inc..

]]>
Reasons for Cylinder Misfires in a Mercedes https://www.schearers.com/reasons-for-cylinder-misfires-in-a-mercedes/ Mon, 23 Sep 2019 10:21:39 +0000 https://www.schearers.com/?p=3335 Mercedes is a leader in safety, luxury, and performance. They are highly recognizable and provide drivers with a comfortable ride. However, cylinder misfires are a common problem experienced by Mercedes owners. Once you have had a misfi...

The post Reasons for Cylinder Misfires in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
Mercedes is a leader in safety, luxury, and performance. They are highly recognizable and provide drivers with a comfortable ride. However, cylinder misfires are a common problem experienced by Mercedes owners. Once you have had a misfire, you may begin to notice poor engine performance and vibrations.

What is an engine misfire?

Your engine needs proper air-to-fuel ratio to operate. Under normal circumstances, the mixture is ignited providing power. If the explosion is premature or late, this is known as a misfire. This explosion creates a loud, surprising pop.

Causes of a Cylinder Misfire

There are several different issues that can lead to misfires. Most issues can be summed up into the following categories:

The Ignition System

Fuel and air combine in your cylinder, and a spark is used to ignite them. This explosion provides power to the engine. Even if the explosion doesn’t occur, the cycle continues and more fuel and air are combined. This type of issue is usually due to a faulty or intermittent spark plug. Spark plugs wear out and are no longer able to ignite on command. The problem can usually be solved by replacing the spark plugs. In some instances, the ignition wires may be faulty or corroded and also need to be replaced.

The Fuel System

Fuel system issues are usually more noticeable when you are idling or driving at low-speeds. Misfires can be caused by not enough fuel entering into the cylinder. When there isn’t enough fuel-to-air ratio, this leads to an oxygen-heavy explosion. On rare occasions, it is also possible that you have bad gas in your Mercedes. There are several parts that regulate the amount of fuel that enters the cylinder. It is important that you have a certified mechanic check out the issue so that you can get it fixed properly.

The Mechanical System

Mechanical issues can also be the cause of misfires. Vacuum lines may be leaking or a timing belt or chain may have slipped. If you have experienced a misfire due to a mechanical issue, you will notice a thumping that doesn’t go away.

Transmission Issues

Misfires don’t always come from the engine. The transmission could be the culprit. If your Mercedes jerks like you just experienced a misfire, the transmission may not be able to shift properly. This type of issue is usually noticeable when driving at faster speeds.

Engine Control Module Problems

The Engine Control Module (ECM) may also be the reason that you are experiencing backfires. The ECM functions as the main computer and gathers information so that it can calculate figures so that you Mercedes runs at maximum power and efficiency. If the ECM is failing, it can lead to all types of problems.

Is it safe to drive your Mercedes if it misfires?

Operating your Mercedes when it is misfiring isn’t usually dangerous unless your car loses power. Continuing to drive your vehicle is hard on the engine and can cause additional problems. Misfiring also decreases fuel efficiency and increases emissions.

Fixing Engine Misfires in Your Mercedes

Many issues can cause your Mercedes to misfire. Some of them can be easily diagnosed and resolved, while others are more difficult to decipher and take longer to repair.

Our certified mechanics have decades of experience and have the knowledge needed to fix your Mercedes right the first time. We aim to provide the best service around and deliver error-free service each and every time.

By bringing your car to Schearer’s Sales & Service, you can rest assured knowing that you will receive dealership-quality service without the high costs. Our mechanics are accustomed to the most common issues that cause cylinder misfires, and they have the expertise needed to repair them quickly and professionally.

Contact Us Today

If you are having an issue with your Mercedes Engine Misfire Issue Fix Mercedes or are in need of regular maintenance, call us today. We serve communities in the Allentown, Bethlehem, and Macungie, PA areas. Give Schearer’s Sales and Service, Inc. a call. You can reach us at 610-395-2514. We will gladly welcome you in as a new client and are confident that you will be happy that you chose us for your Mercedes needs.

The post Reasons for Cylinder Misfires in a Mercedes appeared first on Schearer's Sales and Service, Inc..

]]>
Window Regulator Failure In Mercedes-Benz https://www.schearers.com/window-regulator-failure-in-mercedes-benz/ https://www.schearers.com/window-regulator-failure-in-mercedes-benz/#respond Sat, 22 Dec 2018 06:52:03 +0000 https://outreachlocal.com/clients/schearers/wp/?p=367 The Mercedes-Benz was designed with class in mind. However, not being able to roll your window down isn’t very classy. Although people spend good money to have a working car, there are certain obstacles that occur. One of those is window reg...

The post Window Regulator Failure In Mercedes-Benz appeared first on Schearer's Sales and Service, Inc..

]]>
The Mercedes-Benz was designed with class in mind. However, not being able to roll your window down isn’t very classy. Although people spend good money to have a working car, there are certain obstacles that occur. One of those is window regulator failure. Now, you may think this isn’t a very important function, but you’ll realize how wrong that is the first time you try to go through a drive-thru or enjoy a nice breeze while driving. Bottom line is, nobody wants to see a broken Mercedes.

What Is The Window Regulator?
Not too long ago, drivers had to manually roll their windows up and down with a special lever. It worked great at the time, however, people needed something more advanced. Thus, the electric window regulator was introduced to luxury cars. Now, almost every car has this automatic function. The window regulator allows the driver to simply press a button and control whether or not the window goes up or now. Needless to say, it’s pretty important part of your car.

Why Did My Regulator Fail?
There may be specific issues that impact your Mercedes-Benz. Let’s consider a few specific problems that could result in window regulator failure.

Thermal Irregularities
When you start to experience issues with your window regulator, there may be a few things to consider. To begin, what is the climate like in your area? If your older vehicle is in sub-32-degree weather on a consistent basis, this may impact the regulator. Often times, this important piece may become stuck or frozen in these environments.
How to Fix This: While you can’t change the weather, you can take precautionary steps towards avoiding this problem. Keep your car covered as much as possible. If you know your car will be sitting for a while, start your car and let it run for a bit. This will help this piece to get the activity it needs to not freeze. Thermal regulation can preserve the life of your car in all forms.

Overheated Motors
Your car windows open and close based on specialized motors. If those motors experience any form of temperature malfunctions, it can greatly impact how your windows operate. Especially when heat is involved. When your motors are overheated, it can impact how your windows work. Often times, this will make the motor give out completely.
How to Fix This: It’s best to monitor your vehicle’s temperature on a regular basis. This will keep you informed of any potential changes in your car’s health. When you have your vehicle serviced, have your mechanic check your temperature levels. Being in the know will help you avoid a costly repair.

Separated Cables
Unfortunately, the Mercedes will often experience detachment issues in its lifetime. In order for your windows to roll up and down, there are special cables that have to be attached. If they come apart for some reason, you will experience issues with the window function. Cable detachment is one of the primary reasons for window issues. Often times, there is an underlying issue with your cable pulley system that makes this issue occur.
How to Fix This: If you are experienced with working on cars, you can try to reattach your cables yourself. Although this may sound easy, you may make a mistake that could result in further damage. Instead of taking that risk, why not let a professional Mercedes mechanic perform this task for you? This will ensure that your repair is done correctly and keep your car free from any possible damage.

How We Can Help
One of the best ways to keep your Mercedes in line is to perform routine service maintenance. A professional mechanic can diagnose any potential issues and provide you with the necessary plan of action. Since Mercedes vehicles are luxury vehicles, they often have specialized parts that only a skilled specialist can work with.

Schearer’s Sales and Service, Inc., service the individuals of Allentown, Bethlehem, and Macungie, PA. We can provide an accurate diagnosis of your vehicles issues and perform quality work. If you are in the area and need your Mercedes serviced, don’t take the risk of letting your vehicle go. Bring it in and let a skilled mechanic provide you with the best service!The Mercedes-Benz was designed with class in mind. However, not being able to roll your window down isn’t very classy. Although people spend good money to have a working car, there are certain obstacles that occur. One of those is window regulator failure. Now, you may think this isn’t a very important function, but you’ll realize how wrong that is the first time you try to go through a drive-thru or enjoy a nice breeze while driving. Bottom line is, nobody wants to see a broken Mercedes.

What Is The Window Regulator?
Not too long ago, drivers had to manually roll their windows up and down with a special lever. It worked great at the time, however, people needed something more advanced. Thus, the electric window regulator was introduced to luxury cars. Now, almost every car has this automatic function. The window regulator allows the driver to simply press a button and control whether or not the window goes up or now. Needless to say, it’s pretty important part of your car.

Why Did My Regulator Fail?
There may be specific issues that impact your Mercedes-Benz. Let’s consider a few specific problems that could result in window regulator failure.

Thermal Irregularities
When you start to experience issues with your window regulator, there may be a few things to consider. To begin, what is the climate like in your area? If your older vehicle is in sub-32-degree weather on a consistent basis, this may impact the regulator. Often times, this important piece may become stuck or frozen in these environments.
How to Fix This: While you can’t change the weather, you can take precautionary steps towards avoiding this problem. Keep your car covered as much as possible. If you know your car will be sitting for a while, start your car and let it run for a bit. This will help this piece to get the activity it needs to not freeze. Thermal regulation can preserve the life of your car in all forms.

Overheated Motors
Your car windows open and close based on specialized motors. If those motors experience any form of temperature malfunctions, it can greatly impact how your windows operate. Especially when heat is involved. When your motors are overheated, it can impact how your windows work. Often times, this will make the motor give out completely.
How to Fix This: It’s best to monitor your vehicle’s temperature on a regular basis. This will keep you informed of any potential changes in your car’s health. When you have your vehicle serviced, have your mechanic check your temperature levels. Being in the know will help you avoid a costly repair.

Separated Cables
Unfortunately, the Mercedes will often experience detachment issues in its lifetime. In order for your windows to roll up and down, there are special cables that have to be attached. If they come apart for some reason, you will experience issues with the window function. Cable detachment is one of the primary reasons for window issues. Often times, there is an underlying issue with your cable pulley system that makes this issue occur.
How to Fix This: If you are experienced with working on cars, you can try to reattach your cables yourself. Although this may sound easy, you may make a mistake that could result in further damage. Instead of taking that risk, why not let a professional Mercedes mechanic perform this task for you? This will ensure that your repair is done correctly and keep your car free from any possible damage.

How We Can Help
One of the best ways to keep your Mercedes in line is to perform routine service maintenance. A professional mechanic can diagnose any potential issues and provide you with the necessary plan of action. Since Mercedes vehicles are luxury vehicles, they often have specialized parts that only a skilled specialist can work with.

Schearer’s Sales and Service, Inc., service the individuals of Allentown, Bethlehem, and Macungie, PA. We can provide an accurate diagnosis of your vehicles issues and perform quality work. If you are in the area and need your Mercedes serviced, don’t take the risk of letting your vehicle go. Bring it in and let a skilled mechanic provide you with the best service!

The post Window Regulator Failure In Mercedes-Benz appeared first on Schearer's Sales and Service, Inc..

]]>
https://www.schearers.com/window-regulator-failure-in-mercedes-benz/feed/ 0